Export limit exceeded: 429363 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 429363 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1288 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-69133 | 2026-11-19 | 5.3 Medium | ||
| netty-incubator-codec-ohttp implements Oblivious HTTP (OHTTP) gateway and client functionality using Netty. From 0.0.20.Final until 0.0.27.Final, OHttpClientCodec in codec-ohttp/src/main/java/io/netty/incubator/codec/ohttp/OHttpClientCodec.java and OHttpServerCodec in codec-ohttp/src/main/java/io/netty/incubator/codec/ohttp/OHttpServerCodec.java retain the consumed outer cumulationBuffer after a valid OHTTP exchange completes, even though OHttpRequestResponseContext.destroy in codec-ohttp/src/main/java/io/netty/incubator/codec/ohttp/OHttpRequestResponseContext.java releases the inner Binary HTTP cumulation and the channel remains active. A peer can complete a large request or response and leave the keep-alive connection idle, causing the client and server handlers to retain the current high-water pooled or direct buffer capacity until later inbound content replaces it or the handler is removed. Many long-lived idle connections can pin substantial memory and create availability pressure. The issue does not cause unbounded growth for repeated exchanges on a single channel. This issue is fixed in version 0.0.27.Final. | ||||
| CVE-2026-116830 | 2026-11-19 | N/A | ||
| Missing release of resource after effective lifetime vulnerability in Apache Tomcat's HTTP/2 initial connection handling leads to DoS. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.27, from 10.1.0-M1 through 10.1.61, from 9.0.20 through 9.0.123. Users are recommended to upgrade to version 11.0.29, 10.1.62 or 9.0.124, which fix the issue. Note: Tomcat 11.0.28 was not released | ||||
| CVE-2026-130176 | 2026-11-19 | 7.5 High | ||
| aMQTT is an open source MQTT broker and client. From 0.11.0 until 0.12.1, the QoS 2 transaction handler in amqtt/mqtt/protocol/handler.py, _handle_qos2_message_flow(), can retain transaction state and packet identifiers when a client disconnects before the handshake completes, unlike QoS 1 flows that expire after the default five-second timeout. A remote client can repeatedly begin QoS 2 flows and disconnect without maintaining long-lived connections; anonymous clients can do this with the default configuration, while authenticated deployments remain affected when a client may initiate QoS 2 flows. The retained state grows broker memory until resource exhaustion can terminate the process; no confidentiality or integrity impact is identified. This issue is fixed in version 0.12.1. | ||||
| CVE-2026-133200 | 1 Redhat | 9 Amq Streams, Apicurio Registry, Build Keycloak and 6 more | 2026-11-19 | 5.9 Medium |
| A flaw was found in quarkus-vertx-utils. When a client disconnects while receiving a streaming response, the server fails to detect the closed connection and continues processing the data indefinitely. An unauthenticated remote attacker can exploit this issue by repeatedly initiating streaming requests and disconnecting, exhausting worker threads and resulting in a Denial of Service (DoS). | ||||
| CVE-2026-99563 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: release failed pending sockets of a listener A child of a listener only left the listen.pending or listen.ready list via smbdirect_socket_accept() or when the listener was destroyed. So every connection that failed before it was accepted (negotiate timeout, peer disconnect, invalid negotiate request, ...) stayed on the list and counted against the backlog until the listener was destroyed. After about backlog (10 for ksmbd) such connections smbdirect_listen_connect_request() rejected every new connection with -EBUSY, so an unauthenticated peer was able to permanently stop ksmbd from accepting SMB-Direct connections. Now a failed child moves itself to a new listen.orphaned list at the end of smbdirect_socket_cleanup_work(), after the disconnect was started, and queues listen.purge_orphaned_work, which releases it with smbdirect_socket_release(), without holding the listener's rdma_lock_handler() lock, in the same way smbdirect_socket_destroy() does for the remaining children. Orphaned sockets still count against the backlog until they are released. sc->accept.listener is now only changed under listener->listen.lock and whoever clears it is responsible for releasing the socket: smbdirect_socket_accept(), purge_orphaned_work or the destroy of the listener. In order to make that work: - a struct smbdirect_socket that is a listener is now freed via kfree_rcu(), so that a child can dereference sc->accept.listener under rcu_read_lock(), even if the listener is released concurrently. - smbdirect_listen_connect_request() adds nsc to the listen.pending list and sets nsc->accept.listener before it calls smbdirect_accept_connect_request(), and always returns 0 so the rdma_cm core keeps the connection id and nsc owns it. On a non-zero return it schedules nsc's teardown with smbdirect_socket_schedule_cleanup(), which orphans it off the listener so that purge_orphaned_work releases it; nsc destroys its own connection id with rdma_destroy_id() in that teardown. The teardown has to be deferred because the rdma_cm core holds nsc's id_priv->handler_mutex across the handler, so nsc->rdma.cm_id must not be destroyed synchronously from here. That same handler_mutex (and the listener's) also guarantees nsc can't go away under us, so setting the listener before the call is safe and lets a failure orphan nsc. - smbdirect_accept_negotiate_recv_work() no longer moves a socket to the ready list if it already failed or no longer belongs to the listener. Every accepting socket has a listener, so if sc->accept.listener is already cleared, it no longer sends a negotiate response, as the socket is about to be released. - smbdirect_socket_destroy() of the listener disables purge_orphaned_work and also releases the orphaned sockets. | ||||
| CVE-2026-99383 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reclaim credits for decrypted reads with no matching mid When a decrypted SMB2 READ response carries a MessageId that matches no outstanding request, both the inline receive_encrypted_read() and the offloaded smb2_decrypt_offload() paths drop the frame without accounting the credits the server granted in it. The plaintext unknown-frame path in cifs_demultiplex_thread() already reclaims them with smb2_add_credits_from_hdr(), so encrypted reads leak credits that the plaintext path would not. This also happens for legitimate frames - e.g. a reply that arrives after the client has timed out and dropped the mid - so over a long-lived connection the client's credit count drifts down and can eventually starve it of the ability to issue requests. The frame is AEAD-authenticated, so the granted credits in the decrypted header come from the real server and are safe to apply. Reclaim the credits from the decrypted header before dropping the frame, and export smb2_add_credits_from_hdr() so the SMB2 receive paths can use it. | ||||
| CVE-2026-99376 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: Free the netid when draining a data-server address list nfs4_pnfs_ds_addr_free() releases all three of an address entry's allocations, but the four sites that drain a decoded list before it reaches a data server open-code the loop and free only da_remotestr and the entry, leaking da_netid. Both layout drivers drain that list when nfs4_pnfs_ds_add() returned a data server already in the cache, and again on their error exits. Lift the drain into nfs4_pnfs_ds_addr_list_free() so an address list has one owner. A striping mount reaches the cached case on nearly every GETDEVICEINFO, since many deviceIDs name the same data servers. | ||||
| CVE-2026-99365 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix id-to-name cache entry leak in idtoname_parse() idtoname_lookup() returns the id-to-name cache entry with a new reference. The name is parsed between the lookup and the update call, and when the parsed name is malformed (negative length or longer than IDMAP_NAMESZ), idtoname_parse() jumps to the error label without dropping the reference returned by idtoname_lookup(), leaking the cache entry. Release the reference with cache_put() before taking the error exit. | ||||
| CVE-2026-99348 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix afs to abort the rxrpc call on send error Fix afs_send_empty_reply() and afs_send_simple_reply() to always try to abort the rxrpc call rather than just aborting on -ENOMEM and otherwise abandoning it. If the call is already complete due to network failure or a received abort, this will do nothing. Also make afs_make_call() always abort on send error; again, it does nothing if the rxrpc call is already dead. | ||||
| CVE-2026-110710 | 1 Fastify | 1 Fastify/multipart | 2026-11-18 | 7.5 High |
| @fastify/multipart is the official Fastify plugin for handling multipart/form-data uploads. In versions 3.0.0 through 10.1.3, temporary files written by the saveRequestFiles helper are removed only by a response hook that runs when the response finishes or errors. When a client completes an upload and then disconnects before the handler writes the reply, for example while the handler scans, hashes or forwards the file, the response only emits a close event, the cleanup hook never runs, and the saved files are left on disk. An unauthenticated client can repeat this cheaply to exhaust disk space and deny service to applications that save uploaded files to disk. The issue is fixed in @fastify/multipart 10.1.4, and users should upgrade to 10.1.4 or later. As a workaround, avoid saving request files for untrusted clients, or clean the saved files from a close handler on the raw response so removal also happens when the client disconnects. | ||||
| CVE-2026-80322 | 1 Ping Identity | 1 Pingauthorize | 2026-11-18 | N/A |
| Under specific conditions, PingAuthorize in Gateway mode can continue an asynchronous upstream request after its 30-second gateway timeout. If the underlying keep-alive connection is reused for another request before the original response arrives, the late response can be written to the newer exchange. This could cause a subsequent caller to receive response data intended for an earlier request. This behaviour affects all releases and primarily risks unauthorized information disclosure between separate requests. | ||||
| CVE-2026-130732 | 1 Traefik | 1 Traefik | 2026-11-18 | 7.5 High |
| Traefik from 2.11.58 before 2.11.61 contains a resource leak vulnerability that allows unauthenticated attackers to exhaust resources by sending Authorization headers with NTLM or Negotiate schemes. Attackers can open many short-lived connections that each allocate a dedicated backend transport never released, exhausting memory, file descriptors and backend connections. | ||||
| CVE-2026-98055 | 1 Linux | 1 Linux Kernel | 2026-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Clean up the bus when fetching ML caps fails snd_hdac_ext_bus_get_ml_capabilities() may fail and its return code shall be checked and accounted for. Address the issue by updating the error-path for avs_pci_probe(). At the same time, if the function in question succeeds but the next part of avs_pci_probe() fails, the hlink list shall be cleaned up before leaving the scope. | ||||
| CVE-2026-64499 | 1 Linux | 1 Linux Kernel | 2026-11-18 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1119: fix PM reference leak in buffer preenable ads1119_triggered_buffer_preenable() resumes the device with pm_runtime_resume_and_get() before starting a conversion. If i2c_smbus_write_byte() fails, the function returns the error directly and leaves the runtime PM usage counter elevated. The matching postdisable callback is not called when preenable fails, so the reference is leaked and the device may remain runtime-active indefinitely. Store the I2C transfer result in ret and drop the runtime PM reference on failure before returning the error. | ||||
| CVE-2026-64498 | 1 Linux | 1 Linux Kernel | 2026-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: hw-consumer: free scan_mask on buffer release The scan_mask lifetime changed in commit 9a2e1233d38c ("iio: buffer: hw-consumer: remove redundant scan_mask flexible array"). Before that change, the scan mask storage was embedded in struct hw_consumer_buffer, so iio_hw_buf_release() could free the whole allocation with a single kfree(hw_buf). That commit moved the scan mask to a separate bitmap_zalloc() allocation stored in buffer.scan_mask, but left iio_hw_buf_release() unchanged. Free the scan mask in iio_hw_buf_release() before freeing the buffer wrapper. | ||||
| CVE-2026-64494 | 1 Linux | 1 Linux Kernel | 2026-11-18 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap002: fix runtime PM leak on read error gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the lux value, but if gp2ap002_get_lux() fails, it returns directly. This skips the pm_runtime_put_autosuspend() call at the "out" label, permanently leaking a runtime PM reference and preventing the device from autosuspending. Replace the direct return with a "goto out" to ensure the reference is properly dropped on the error path. | ||||
| CVE-2026-64493 | 1 Linux | 1 Linux Kernel | 2026-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: pressure: mpl115: fix runtime PM leak on read error mpl115_read_raw() takes a runtime PM reference with pm_runtime_get_sync() before reading the processed pressure or raw temperature, but on the read error path it returns without calling pm_runtime_put_autosuspend(). Each failed read therefore leaks a runtime PM reference and prevents the device from autosuspending. Drop the reference before checking the return value so both the success and error paths are balanced. | ||||
| CVE-2026-64501 | 1 Linux | 1 Linux Kernel | 2026-11-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad_sigma_delta: fix CS held asserted and state leaks In ad_sigma_delta_single_conversion(), set_mode(AD_SD_MODE_IDLE) and disable_one() were called from the out: block while keep_cs_asserted was still true. This caused any SPI transfer issued by those callbacks to carry cs_change=1, leaving CS permanently asserted after the conversion. Fix by moving both calls into the out_unlock: block, after keep_cs_asserted is cleared, matching the pattern already used in ad_sd_calibrate(). In the error path of ad_sd_buffer_postenable(), if an operation fails after set_mode(AD_SD_MODE_CONTINUOUS) has already succeeded (e.g. spi_offload_trigger_enable()), the device is left in continuous conversion mode with CS physically asserted. Additionally, bus_locked remaining true after spi_bus_unlock() causes subsequent SPI operations to call spi_sync_locked() without the bus lock actually held, allowing concurrent SPI access. Fix the error path by clearing keep_cs_asserted first, then calling set_mode(AD_SD_MODE_IDLE) to revert the device mode and deassert CS, then clearing bus_locked before releasing the bus. For devices that implement neither set_mode nor disable_one (such as MAX11205, which has no physical CS pin), no SPI transfer is issued during cleanup and the cs_change flag has no effect on any physical line. | ||||
| CVE-2026-64503 | 1 Linux | 1 Linux Kernel | 2026-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync() but returns -EINVAL directly when a scale with a non-zero integer part is requested, skipping the matching pm_runtime_put_autosuspend(). This leaks a runtime PM usage-counter reference on every such write, after which the device can no longer autosuspend. Set the error code and fall through to the existing put instead of returning early. | ||||
| CVE-2026-64526 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: tsconfig: fix missing ethnl_ops_complete() tsconfig_prepare_data() calls ethnl_ops_begin(), we need to call ethnl_ops_complete() before returning the error. | ||||