| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Unchecked Input for Loop Condition vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).Micro-BFD session flaps generate respective up/down events which are queued by PFEMAN for processing. Especially in a Virtual-Chassis (VC) scenario with locality‑bias configured, processing takes a significant amount of time for each event. If these sessions keep flapping, new events are constantly added, and in turn PFEMAN never completes processing these events. This results in the PFEMAN watchdog timer expiring, which causes the FPC to crash and restart, representing a complete service outage.
This issue only affects MX series FPCs up to and including MPC9. It does not affect MPC10/11, LC4800/9600 and MX304.
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S3,
* 25.2 versions before 25.2R2. |
| node-tar is a tar archive manipulation library for Node.js. Prior to 7.5.18, tar.replace accepts a checksum-valid tar header with a negative base-256 encoded entry size, causing the archive scanner to make no progress while repeatedly parsing the same header. This issue is fixed in version 7.5.18. |
| Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, a Markdown document containing many repeated or distinct reference-link definitions causes quadratic work in src/mistune/block_parser.py and the ref_links environment dictionary handling, allowing denial of service through CPU exhaustion. This issue is fixed in version 3.3.0. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.14.2, an attacker can craft a PDF with a page content stream containing a not terminated inline image that uses the ASCII85 or ASCIIHex filters, causing an infinite loop during parsing such as when extracting page text. This issue is fixed in version 6.14.2. |
| py7zr is a Python-based library and utility to support 7zip archive compression, decompression, encryption and decryption. Prior to 1.1.3, PackInfo._read() in archiveinfo.py used an O(n^2) cumulative sum pattern for attacker-controlled numstreams values parsed from archive headers, allowing a crafted .7z archive to cause excessive CPU consumption during SevenZipFile.init() before extraction. This issue is fixed in version 1.1.3. |
| FMP/NOTIFY protocol dissector crash in Wireshark 4.6.0 to 4.6.6 and 4.4.0 to 4.4.16 allows denial of service |
| An issue in the sqlo_try_in_loop component of openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements. |
| When using the "tarfile" module with a file opened in "streaming mode" (mode="r|") the tarfile module did not properly handle EOF, making archive parsing take exponentially longer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Reject empty multisync extension to prevent infinite loop
v3d_get_extensions() walks a userspace-provided singly-linked list of
ioctl extensions without any bound on the chain length. A local user
can craft a self-referential extension (ext->next == &ext) with zero
in_sync_count and out_sync_count, which bypasses the existing duplicate-
extension guard:
if (se->in_sync_count || se->out_sync_count)
return -EINVAL;
The guard never fires because v3d_get_multisync_post_deps() returns
immediately when count is zero, leaving both fields at zero on every
iteration. The result is an infinite loop in kernel context, blocking
the calling thread and pegging a CPU core indefinitely.
Fix this by rejecting a multisync extension where both in_sync_count
and out_sync_count are zero in v3d_get_multisync_submit_deps(). An
empty multisync carries no synchronization information and serves no
useful purpose, so returning -EINVAL for such an extension is the
correct defense against this attack vector. |
| libssh2 through 1.11.1, fixed in commit 1762685, contains a pre-authentication denial of service vulnerability in the SSH_MSG_EXT_INFO handler in src/packet.c that allows a malicious SSH server to cause a client CPU exhaustion loop by sending a crafted extension count value. A malicious server can set nr_extensions to 0xFFFFFFFF during key exchange, causing the client to spin in a tight CPU loop for over 60 seconds because return values from _libssh2_get_string() are unchecked and the session timeout does not apply to CPU-bound loops. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: stop parsing UAC2 rates at MAX_NR_RATES
parse_uac2_sample_rate_range() caps the number of enumerated
rates at MAX_NR_RATES, but it only breaks out of the current
rate loop. A malformed UAC2 RANGE response with additional
triplets continues parsing the remaining triplets and repeatedly
prints "invalid uac2 rates" while probe still holds
register_mutex.
Stop the whole parse once the cap is reached and return the
number of rates collected so far. |
| unicodedata.normalize() can take excessive CPU time when processing
specially crafted Unicode input containing long runs of combining characters
with alternating Canonical Combining Class values.
This affects all normalization forms. |
| kafka-python prior to 2.3.2 contains a denial-of-service vulnerability in SCRAM authentication handling that allows a malicious or machine-in-the-middle broker to freeze the client event loop by supplying an excessively large iteration count. In scram.py, ScramClient.process_server_first_message() passes the broker-controlled SCRAM iteration count directly to hashlib.pbkdf2_hmac() without validation, blocking producer sends, consumer polls, admin operations, and heartbeats, which can cause consumer group eviction and repeated reconnect failures. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3()
The convert_chmap_v3() has a loop with its increment size of
cs_desc->wLength, but we forgot to validate cs_desc->wLength itself,
which may lead to potential endless loop by a malformed descriptor.
Add a proper size check to abort the loop for plugging the hole. |
| Logic bypass vulnerability in the file system. Impact: Successful exploitation of this vulnerability may affect availability. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mrp: reject zero test interval to avoid OOM panic
br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied
interval value from netlink without validation. When interval is 0,
usecs_to_jiffies(0) yields 0, causing the delayed work
(br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule
itself with zero delay. This creates a tight loop on system_percpu_wq
that allocates and transmits MRP test frames at maximum rate, exhausting
all system memory and causing a kernel panic via OOM deadlock.
The same zero-interval issue applies to br_mrp_start_in_test_parse()
for interconnect test frames.
Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both
IFLA_BRIDGE_MRP_START_TEST_INTERVAL and
IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the
netlink attribute parsing layer before the value ever reaches the
workqueue scheduling code. This is consistent with how other bridge
subsystems (br_fdb, br_mst) enforce range constraints on netlink
attributes. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.12.0, an attacker who uses this vulnerability can craft a PDF which leads to long runtimes. This requires cross-reference streams with /W [0 0 0] values and large /Size values. This vulnerability is fixed in 6.12.0. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: Fix infinite loop from zero-length messages
If a broken ucan device gets a message with the message length field set
to 0, then the driver will loop for forever in
ucan_read_bulk_callback(), hanging the system. If the length is 0, just
skip the message and go on to the next one.
This has been fixed in the kvaser_usb driver in the past in commit
0c73772cd2b8 ("can: kvaser_usb: leaf: Fix potential infinite loop in
command parsers"), so there must be some broken devices out there like
this somewhere. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: prevent infinite loops caused by the next valid being the same
When processing valid within the range [valid : pos), if valid cannot
be retrieved correctly, for example, if the retrieved valid value is
always the same, this can trigger a potential infinite loop, similar
to the hung problem reported by syzbot [1].
Adding a check for the valid value within the loop body, and terminating
the loop and returning -EINVAL if the value is the same as the current
value, can prevent this.
[1]
INFO: task syz.4.21:6056 blocked for more than 143 seconds.
Call Trace:
rwbase_write_lock+0x14f/0x750 kernel/locking/rwbase_rt.c:244
inode_lock include/linux/fs.h:1027 [inline]
ntfs_file_write_iter+0xe6/0x870 fs/ntfs3/file.c:1284 |
| An unbounded resend loop vulnerability exists in the BIND 9 resolver state machine during bad-server handling, enabling a remote unauthenticated attacker to cause severe resource exhaustion by sending queries that trigger specific retry conditions.
This issue affects BIND 9 versions 9.18.36 through 9.18.48, 9.20.8 through 9.20.22, 9.21.7 through 9.21.21, 9.18.36-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1. |
