| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A DANE-enabled TLS client may crash by dereferencing a NULL pointer when processing an unusual combination of certificate and TLSA records. |
| In Eclipse Mosquitto versions 2.1.0 to 2.1.2, using the mosquitto_ctrl utility in interactive shell mode to interact with a malicious server could result in a crash of the utility if the server sent a hostile response. |
| In Eclipse Mosquitto versions 2.1.0 to 2.1.2, the mosquitto_ctrl utility would crash if attempting to interact with a hostile broker and the broker sent a non-string "error" value. |
| A weakness has been identified in OSGeo shapelib up to 1.6.3. This vulnerability affects the function DBFCloneEmpty of the file dbfopen.c. This manipulation causes null pointer dereference. It is possible to launch the attack on the local host. Patch name: f79050a900d2a05529501b2b714b8f89067db071. It is recommended to apply a patch to fix this issue. |
| ALTCHA is a Go library for creating and verifying ALTCHA challenges. Prior to 2.1.0, parseServerSignature can leave ServerSignatureVerificationData.Extra uninitialized when url.ParseQuery returns partial values and an error for a malformed percent escape in VerificationData. A later write of an unknown parsed key to the nil map panics before VerifyServerSignature or VerifyServerSignatureSafe completes signature verification, so an unauthenticated client can abort a request. Standard net/http recovers the request goroutine, while application goroutines or frameworks without recovery can crash the process. This issue is fixed in version 2.1.0. |
| In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17, an unauthenticated user who can connect to a Splunk-to-Splunk (S2S) data forwarding receiver could cause the Splunk daemon to terminate unexpectedly. The unexpected termination interrupts data indexing and access to the management API and Splunk Web until the Splunk Enterprise process restarts.
The vulnerability is possible because the S2S data forwarding receiver does not validate an optional field in forwarded event data, which results in a null pointer dereference when the field is missing.
For more information see Intermediate data routing using universal and heavy forwarders (https://help.splunk.com/en/splunk-enterprise/get-started/splunk-validated-architectures/getting-data-in-forwarding-and-preprocessing/intermediate-data-routing-using-universal-and-heavy-forwarders) in the Splunk documentation. |
| When NGINX Plus or NGINX Open Source is configured to use the try_files and alias directives with a map variable, certain combinations of regular expression captures in map and try_files can cause a segmentation fault in an NGINX worker process.
Impact:
An attacker could leverage this vulnerability to cause an NGINX worker process to terminate unexpectedly. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A NULL Pointer Dereference vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS allows a local, low-privileged attacker to cause a Denial-of-Service (DoS).
When a specific command is executed, the pfe crashes. This will cause traffic forwarding to be interrupted until the system self-recovers. Repeated execution will create a sustained DoS condition.
This issue only affects MX Series devices with Line cards MPC1-MPC9.
This issue affects:
Junos OS on MX Series:
* All versions before 21.4R3-S9,
* from 22.2 before 22.2R3-S5,
* from 22.3 before 22.3R3-S4,
* from 22.4 before 22.4R3-S2,
* from 23.2 before 23.2R2-S1,
* from 23.4 before 23.4R2. |
| Null pointer dereference in Windows USM Communication Manager allows an authorized attacker to elevate privileges locally. |
| Null pointer dereference in Windows Hyper-V allows an authorized attacker to deny service locally. |
| Tanium addressed a denial of service vulnerability in Enforce. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix reset panic caused by the WM2 rx irq mask
mt7925_irq_map sets wm2_complete_mask, but mt7925_dma_layout has no
tx done ring, so the MT_RXQ_MCU_WA queue and its NAPI are never set up.
On a chip reset, mt7925e_mac_reset() calls napi_disable() on that NAPI
and crashes:
BUG: kernel NULL pointer dereference, address: 0000000000000a40
Workqueue: mt76 mt7925_mac_reset_work [mt7925_common]
RIP: 0010:mutex_lock+0x1c/0x50
Call Trace:
napi_disable+0x1d/0x50
mt7925e_mac_reset+0x327/0x420 [mt7925e]
mt7925_mac_reset_work+0x9a/0x1a0 [mt7925_common]
Remove the WM2 mask from mt7925_irq_map and from
MT7925_INT_RX_DONE_ALL. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-crypto: fix NULL deref and UAF in __blk_crypto_evict_key()
Sashiko reported a possible NULL pointer dereference, triggered by the
following flow:
dm-inlinecrypt ctor # first use of the fallback
├─ blk_crypto_init_key() # succeeds, ctx->key.size != 0
├─ blk_crypto_start_using_key()
│ ├─ hw-wrapped key: -EOPNOTSUPP
│ │ # profile never allocated (NULL)
│ └─ raw key: fallback_start_using_mode()
│ └─ blk_crypto_fallback_init() fails
│ └─ kfree(profile) # not NULLed
├─ goto bad
└─ inlinecrypt_dtr() # evicts whenever key.size is set
└─ blk_crypto_evict_key()
└─ blk_crypto_config_supported_natively() = false
└─ blk_crypto_fallback_evict_key()
└─ __blk_crypto_evict_key(blk_crypto_fallback_profile)
└─ profile->num_slots # BOOM!!!
This issue can be reproduced using the following commands:
dd if=/dev/zero of=/tmp/backing bs=1M count=64
LOOP=$(losetup -f --show /tmp/backing)
SZ=$(blockdev --getsz $LOOP)
KEY=$(head -c 64 /dev/urandom | od -An -tx1 | tr -d ' \n')
dmsetup create ic --table "0 $SZ inlinecrypt aes-xts-plain64 \
$KEY 0 $LOOP 0 1 keytype:hw-wrapped"
And the following oops is triggered:
==================================================================
blk-crypto: loop0: no support for wrapped keys
Oops: general protection fault, probably for non-canonical address
0xdffffc000000000b: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000058-0x000000000000005f]
CPU: 5 UID: 0 PID: 901 Comm: dmsetup 7.3.0-rc3 #1 PREEMPT(lazy)
RIP: 0010:__blk_crypto_evict_key+0x2e/0x3b0
Call Trace:
blk_crypto_evict_key+0x24c/0x320
inlinecrypt_dtr+0xf6/0x160
inlinecrypt_ctr+0x2d3/0xbd0
dm_table_add_target+0x661/0xf40
table_load+0x1c4/0x490
ctl_ioctl+0x32f/0x5f0
dm_ctl_ioctl+0xe/0x20
==================================================================
dm-inlinecrypt is the only caller that can evict a key that was never
started, as fscrypt frees such a key without evicting it.
Fix this by returning early from blk_crypto_fallback_evict_key() when
tfms_inited[] is not set for the key's mode. tfms_inited[] is only set
after blk_crypto_fallback_init() has successfully initialized the
profile, so the crash above is no longer reachable.
The bug has been latent since commit c984ff1423ae ("blk-crypto:
dynamically allocate fallback profile") was merged in v6.5, and only
became actually triggerable when commit e7f57d2c47e2 ("dm-inlinecrypt:
add target for inline block device encryption") was merged in v7.2. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fail readdir when the MDS reply carries no dirfrag
A ceph mount oopses in ceph_readdir() when the MDS answers a READDIR
request with a reply whose extra blob is empty. parse_reply_info()
skips reply blobs whose length is zero, so parse_reply_info_readdir()
never runs, r_reply_info.dir_dir stays NULL, and the reply still
parses as successful. ceph_mdsc_do_request() returns 0 and
ceph_readdir() then reads rinfo->dir_dir->frag with no NULL check:
/* extra */
ceph_decode_32_safe(&p, end, len, bad);
if (len > 0) {
...
err = parse_reply_info_extra(&p, p + len, req, features, s);
...
}
The oops on v7.3.0-rc4-00537-ga3ff15db6820, one getdents64(2) on the
mount root after an ms_mode=legacy mount, trimmed:
BUG: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
CPU: 1 UID: 0 PID: 266 Comm: ls Tainted: G N 7.3.0-rc4-00537-ga3ff15db6820 #1 PREEMPT(lazy)
RIP: 0010:ceph_readdir+0xbff/0x3ea0
Call Trace:
<TASK>
? __pfx_ceph_readdir+0x10/0x10
wrap_directory_iterator+0xa2/0xe0
iterate_dir+0x1da/0x5d0
__x64_sys_getdents64+0x13b/0x2a0
do_syscall_64+0xdd/0x4a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The unconditional frag read came in with 81c6aea5275ea ("ceph: handle
frag mismatch between readdir request and reply"), so the bug is old.
Treat a reply with no dirfrag as a protocol violation: warn once,
drop the request and return -EIO, the same way ceph_readdir() already
handles the two malformed-reply cases later in the function.
Tested on v7.3.0-rc4-00537-ga3ff15db6820 (KASAN). Unpatched, the
getdents64(2) above takes the machine down (oops=panic) on the first
READDIR reply. With the patch it warns once and getdents64(2)
returns -EIO, no oops, no hang. A conformant reply for an empty
directory — dirfrag present, zero entries, FRAG_END|FRAG_COMPLETE —
still lists "." and ".." and returns EOF on both kernels, so normal
readdir behavior is unchanged. The oops is still present in
v7.3-rc5 (72d3fcf802c45). |
| In the Linux kernel, the following vulnerability has been resolved:
media: usbtv: fix null-pointer dereference on disconnect
A null-pointer dereference can occur in usb_make_path() when called from
usbtv_querycap() (and other ioctl handlers) during device disconnection.
Oops: general protection fault, probably for non-canonical address
0xdffffc000000000a: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
RIP: 0010:usb_make_path include/linux/usb.h:985 [inline]
RIP: 0010:usbtv_querycap+0x9c/0x100
drivers/media/usb/usbtv/usbtv-video.c:612
...
Call Trace:
<TASK>
v4l_querycap+0x236/0x470 drivers/media/v4l2-core/v4l2-ioctl.c:1106
__video_do_ioctl+0x8af/0xc70 drivers/media/v4l2-core/v4l2-ioctl.c:3133
video_usercopy+0x860/0x1430 drivers/media/v4l2-core/v4l2-ioctl.c:3475
v4l2_ioctl+0x18d/0x1e0 drivers/media/v4l2-core/v4l2-dev.c:366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
This happens due to a race condition between the USB device disconnect
routine (usbtv_disconnect()) and V4L2 ioctls. When the device is
disconnected, usbtv_disconnect() sets usbtv->udev = NULL without holding
the usbtv->v4l2_lock mutex. Concurrently, an ioctl handler like
usbtv_querycap() can be executing under the v4l2_lock and attempt to use
usbtv->udev, leading to a crash.
To fix this, move the usbtv->udev = NULL assignment into usbtv_video_free()
and protect it with mutex_lock(&usbtv->v4l2_lock). This ensures that no
non-queue ioctl handler can run concurrently with the pointer being
nullified. If an ioctl is already running, the mutex will block the
disconnect path until the ioctl finishes. If an ioctl is blocked waiting
for the lock, it will acquire it after the disconnect routine releases it,
but will then check video_is_registered() (which was cleared by
vb2_video_unregister_device()) and safely return -ENODEV.
Acquiring v4l2_lock after vb2_video_unregister_device() avoids
reintroducing a historical deadlock issue, and usbtv_audio_free() remains
safe as it is called before usbtv_video_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: drain quorum work before removing the cluster
The configured cluster must remain available until an in-flight quorum
decision has finished using its fencing method. o2quo_make_decision()
drops qs_lock before calling o2quo_fence_self(), which marks heartbeat
regions for unclean stop and then reads
o2nm_single_cluster->cl_fence_method. Cluster removal clears the
singleton without waiting for this independent system-workqueue item.
When a failed-quorum decision overlaps removal of the heartbeat regions,
nodes and cluster through configfs, the worker can be preempted after
marking the regions and resume after the singleton has been cleared:
Quorum worker Configfs removal
select fence; drop qs_lock
o2hb_stop_all_regions()
remove regions; join heartbeat threads
remove nodes; stop o2net
clear singleton; release cluster
read cl_fence_method
The resumed read dereferences NULL instead of applying the configured
fencing method. The heartbeat thread's dependency protects the local
node only until the thread exits, and draining o2net does not wait for
qs_work.
Add o2quo_flush_work() to drain pending or running quorum decisions
before clearing the singleton in o2nm_cluster_group_drop_item(). By
this point the heartbeat regions and nodes have been removed, so their
work publishers are stopped. The worker can finish while the cluster
and its configured fencing method remain available. It does not acquire
the configfs mutex held by the removal path.
Keep o2quo_exit() as the counterpart of o2quo_init() for module teardown
and initialization failure, and have it call the same drain helper.
Cluster removal uses only the explicitly named drain operation.
KASAN report as below:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000011b: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x00000000000008d8-0x00000000000008df]
CPU: 0 UID: 0 PID: 72 Comm: kworker/0:2 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: events o2quo_make_decision
RIP: 0010:o2quo_fence_self+0x65/0x200
Register dump omitted.
Call Trace:
<TASK>
o2quo_make_decision+0x345/0x3a0
? __pfx_o2quo_make_decision+0x10/0x10
? process_one_work+0x834/0x1b40
? srso_alias_return_thunk+0x5/0xfbef5
? lock_release+0xc8/0x290
? srso_alias_return_thunk+0x5/0xfbef5
process_one_work+0x9a8/0x1b40
? __pfx_process_one_work+0x10/0x10
? lock_acquire+0x190/0x300
? lock_is_held_type+0x8f/0x100
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x65c/0xe40
? srso_alias_return_thunk+0x5/0xfbef5
? __kthread_parkme+0x177/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx_worker_thread+0x10/0x10
kthread+0x351/0x460
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx_kthread+0x10/0x10
ret_from_fork+0x659/0x940
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x74f/0xf70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: do not pass a NULL buf to is_oplock_break()
receive_encrypted_read() sets *num_mids = 1 and never writes the
caller's bufs[]. Offload returns -1 with *num_mids = 0, so the
demultiplex thread skips the frame. The inline decrypt path
returns 0 even when smb2_find_mid() fails.
cifs_demultiplex_thread() then treats mids[i] == NULL as an
oplock break and calls is_oplock_break(bufs[i], server) with
bufs[i] still NULL. smb2_is_valid_oplock_break() reads
hdr.Command at offset 12 and oopses.
A large encrypted READ whose MessageId does not match is enough
to panic cifsd.
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range
[0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 100 Comm: cifsd
RIP: smb2_is_valid_oplock_break+0xc8/0x2270 [cifs]
cifs_demultiplex_thread
Kernel panic - not syncing: Fatal exception
Return -1 when inline decrypt finds no mid, and skip
is_oplock_break() plus the unknown-frame dump when bufs[i]
is NULL. receive_encrypted_standard() already assigns
bufs[*num_mids]. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix early procfs exposure race
Currently, init_cifs() calls cifs_proc_init() near the beginning of
the function, before INIT_LIST_HEAD, leading to a momentarily
uninitialized, but exposed, procfs. If a userspace process reads this
empty procfs, iterating over a zeroed list_head leads to a NULL
pointer dereference and a kernel oops/panic.
For example, if a delay is added between cifs_proc_init() and
INIT_LIST_HEAD, and a userspace process is polling
/proc/fs/cifs/DebugData, the following oops occurs:
BUG: kernel NULL pointer dereference, address: 0000000000000608
Oops: Oops: 0000 [#1] SMP PTI
CPU: 0 UID: 0 PID: 3477 Comm: cat Not tainted
7.3.0-02212-g4df4d2a577db-dirty #6 PREEMPT(lazy)
RIP: 0010:cifs_debug_data_proc_show+0x103/0xd80 [cifs]
Call Trace:
<TASK>
? seq_read_iter+0x86/0x400
? seq_read_iter+0x86/0x400
seq_read_iter+0x183/0x400
proc_reg_read_iter+0x62/0x90
copy_splice_read+0x215/0x310
splice_file_to_pipe+0xec/0x1c0
do_splice+0x4b8/0x780
__se_sys_splice+0x18f/0x250
do_syscall_64+0x109/0x330
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this by moving cifs_proc_init() down in init_cifs(), ensuring it runs
only after all internal lists, locks, counters, and workqueues are fully
ready, but before registering the filesystem. Update the error cleanup
ladder and exit_cifs() to maintain proper LIFO order. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Do not RPM complete unrelated subtrees on unplug
When a Thunderbolt device is unplugged, that switch and every switch
subsequent to it on the bus device list is `complete()`d, not just its
child devices. In the case of multiple domains, it may cause, eg, an
attempt to `complete()` the uninitialized domain 1 root switch RPM
completion on unplug of a switch from domain 0 (though ordering is not
guaranteed numerically sorted).
I initially noticed this issue on a Dell XPS9720 when the system would
seem to sporadically not wake after unplugging a Thunderbolt dock. I
tried multiple kernel versions including v7.2.7 and v7.3-rc4 to see if
that resolved the issue, but the issue persisted. Eventually I found
that I could consistently generate a kernel Oops reporting a page fault
at 0xffff_ffff_ffff_fff8 on unplug from one side of the laptop and went
bug hunting. I became suspicious of the `bus_for_each_dev()` walk that I
ultimately ended up changing. To confirm this issue, I did an eBPF trace
of `bus_for_each_dev()`, `complete_rpm()`, and `complete()` while
unplugging in a variety of situations and found that an unplug from
domain 0 tries to `complete_rpm()` domain 1's switch, whose RPM
completion is not initialized and thus is holding a null wait-list
pointer, triggering the page fault.
Here are the key sections of that eBPF trace. Note that HEAD denotes the
completion's own wait-list HEAD:
```
RESCAN_ENTER domain=0
COMPLETE rescan_domain=0 target=0-1 target_domain=0
route=0x1 parent=0-0 unplugged=1
COMPLETION done=0 head=HEAD next=HEAD prev=HEAD
BUS_WALK domain=0 start=0-1 callback=complete_rpm
CALLBACK_ENTER rescan_domain=0 dev=1-0 parent=domain1 is_switch=1
COMPLETE rescan_domain=0 target=1-0 target_domain=1
route=0x0 parent=domain1 unplugged=0
COMPLETION done=0 head=HEAD next=0 prev=0
complete+5
complete_rpm+43
bus_for_each_dev+133
icm_free_unplugged_children+250
icm_rescan_work+42
```
This patch gates the `complete()` on an additional condition - that the
Thunderbolt domain matches the domain of the device that was unplugged.
I only have a single system with multiple Thunderbolt domains - the Dell
XPS9720. I am consistently able to reproduce the Oops on that system.
Since running with this patch, I have not seen the Oops reoccur. I have
also tested it on a Thinkpad X1-Gen12, and that system boots and runs
well with it, but it only has a single Thunderbolt domain, so it does
not exercise the multi-domain failure case. |
| In the Linux kernel, the following vulnerability has been resolved:
backlight: qcom-wled: Fix NULL pointer dereference in wled_remove()
wled_probe() doesn't set the driver data for the platform device.
As a result, platform_get_drvdata() in wled_remove() will return NULL,
and the first dereference of it crashes on unbind.
Set the platform device driver data in wled_probe(). |