| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Grav is a file-based Web platform. Prior to 1.7.53, an authenticated administrator with backup permissions can download a ZIP archive containing the full Grav installation root, including user/accounts/admin.yaml with the administrator password hash and user/config with site configuration, through the backup download endpoint protected only by the session-static admin-nonce URL parameter. This issue is reported as fixed in version 1.7.53. |
| Fiber is an Express inspired web framework written in Go. Prior to 3.4.0, the helmet middleware in middleware/helmet/helmet.go never sets the Strict-Transport-Security response header even when HSTSMaxAge is configured because it checks c.Protocol() for https instead of c.Scheme(). This issue is fixed in version 3.4.0. |
| Unauthorized use of Kyocera printers, allows all information stored in the Kyocera address book to be exported. The security measure that encrypts incoming data ian be bypassed with this vulnerability, allowing encrypted data to be decrypted. Passwords and other sensitive information can be obtained. This affects Kyocera Command Center RX TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 2553ci, TASKalfa 3253ci, TASKalfa 3554ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 7052ci, TASKalfa 8052ci, TASKalfa 7353ci, TASKalfa 8353ci, TASKalfa 2554ci, TASKalfa 3254ci, TASKalfa 505. |
| CoreWCF is a port of the service side of Windows Communication Foundation (WCF) to .NET Core. In version 1.9.0, CoreWCF SPNEGO SecurityContextToken negotiation can expose the proof key recovered from the RSTR when TransportWithMessageCredential with Windows client credentials and session establishment are used, allowing an observer to impersonate the authenticated Windows principal and decrypt or forge WS-SecureConversation traffic. This issue is fixed in version 1.9.1. |
| A flaw has been found in zcaceres markdownify-mcp up to 1.1.0. This impacts the function saveToTempFile of the file src/Markdownify.ts of the component webpage-to-markdown/youtube-to-markdown/bing-search-to-markdown. This manipulation causes insufficiently random values. The attack is restricted to local execution. A high degree of complexity is needed for the attack. The exploitability is said to be difficult. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance. |
| Puppet resource_api (shipped in Puppet Core 8.x and Puppet Enterprise 2023.8.x and 2025.x) does not preserve the sensitive flag on parameters defined via the resource-api, causing values such as passwords to be stored in cleartext in the agent's local transaction state cache. Affected versions of the resource_api module include all versions between 1.5.0 - 1.9.1 and 2.0.0 The issue was fixed in puppet resource_api 1.9.2 and 2.0.1 released with Puppet Core 8.20.0 and PE 2023.8.10 & PE 2025.11.0. |
| Jenkins Job Configuration History Plugin 1356.ve360da_6c523a_ and earlier does not redact the encrypted values of secrets when displaying historical job and agent configurations, allowing attackers with Extended Read permission to view encrypted secret values that would otherwise be redacted. |
| Overview:
A vulnerability has been found in FAST/TOOLS and CI Server. The web server may return a response containing the CI Server setting information. This information could
be exploited by an attacker for other attacks.
The affected products and versions are as follows:
FAST/TOOLS (Packages: RVSVRN, UNSVRN, HMIWEB, FTEES, HMIMOB) R9.01 to R10.04
CI Server (All packages) R1.01 to R1.04 |
| Guzzle is an extensible PHP HTTP client. Prior to 7.12.1, in certain configurations, traffic expected to be protected by TLS on the hop to the proxy is transmitted in cleartext. Proxy authentication credentials (the Proxy-Authorization header, proxy userinfo in the proxy URL, or CURLOPT_PROXYUSERPWD) are sent without encryption, and the CONNECT target host and port for tunneled HTTPS requests are exposed. The built-in cURL handlers (GuzzleHttp\Handler\CurlHandler and GuzzleHttp\Handler\CurlMultiHandler, used by default whenever the PHP cURL extension is available) accept an https:// proxy. libcurl older than 7.50.2 silently treats an https:// proxy as a plaintext http:// proxy. The TLS connection to the proxy is never established, and the proxy leg is cleartext with no error or warning. An application is affected when it sends requests through one of the built-in cURL handlers, configures an https:// proxy expecting the proxy connection itself to be encrypted, and runs with libcurl older than 7.50.2. This vulnerability is fixed in 7.12.1. |
| HCL Connections contains a broken access control vulnerability that may allow an unauthorized user to view data in a single specific scenario. |
| Deno is a JavaScript, TypeScript, and WebAssembly runtime. From 2.0.0 until 2.7.8, a flaw in Deno's Node.js tls compatibility layer could cause a TLS client to transmit application data in plaintext after a connection retry. When `autoSelectFamily was enabled and the first address-family attempt failed, the socket reinitialization path reused a stale TLS upgrade hook that was bound to the original, failed handle. As a result, the replacement TCP connection was never upgraded to TLS, and any data the application wrote before the secureConnect event travelled over the network unencrypted. A network attacker positioned to cause the initial connection attempt to fail (for example, by dropping IPv6 traffic on a dual-stack host) could deterministically trigger the fallback path and observe or tamper with traffic that the application believed was TLS-protected. This vulnerability is fixed in 2.7.8. |
| Medtronic MyCareLink Patient Monitor uses per-product credentials that are stored in a recoverable format. An attacker can use these credentials for network authentication. |
| IBM Datacap 9.1.7, 9.1.8, and 9.1.9 and IBM Datacap Navigator 9.1.7, 9.1.8, and 9.1.9 allows an attacker to retrieve user passwords and cryptographic keys from memory. Attacker can use the same keys to decrypt password, gain access to the application and access sensitive data in the database. |
| An attacker within BLE communication range can passively intercept
wireless traffic and obtain sensitive health-related information,
including glucose measurement values. |
| Cleartext Transmission of Sensitive Information, Insufficiently Protected Credentials vulnerability in rustdesk-client RustDesk Client rustdesk-client on Windows, MacOS, Linux, iOS, Android (Address book sync, Heartbeat sync loop modules) allows Sniffing Attacks.
The client places the preset address-book password verbatim into the heartbeat sync JSON body (src/hbbs_http/sync.rs). Over an intact HTTPS session it is not exposed in transit, but it is a reusable shared secret rather than a zero-knowledge proof, so it is recovered by any party that becomes the API endpoint - under the automatic invalid-certificate TLS downgrade (CVE-2026-30794) or a re-homed/rogue API server (CVE-2026-30797) - and the leaked credential then authorizes the server-side address book.
This vulnerability is associated with program files src/hbbs_http/sync.rs and program routines heartbeat sync body builder (emits preset-address-book-password).
This issue affects RustDesk Client: through 1.4.8. |
| Steeltoe is an open source project that provides a collection of libraries that helps users build cloud-native applications. In Steeltoe.Management.Endpoint prior to version 4.2.0 and Steeltoe.Management.EndpointCore prior to version 3.4.0, the `Sanitizer` component in the Environment actuator redacts configuration values by matching the configuration key name against a suffix list. The default list (`password`, `secret`, `key`, `token`, `.*credentials.*`, `vcap_services`) does not cover the standard .NET pattern `ConnectionStrings:<name>` or Steeltoe Connectors' `Steeltoe:Client:<type>:Default:ConnectionString`. There is no value-based scrubbing, so full connection string values including embedded `Password=` and `user:pass@host` segments are returned verbatim in `/actuator/env` responses. Steeltoe.Management.Endpoint 4.2.0 and Steeltoe.Management.EndpointCore 3.4.0 patch the issue. If an immediate upgrade is not possible: On the standard path, remove `env` from the actuator exposure list; add `.*connectionstring.*` to `KeysToSanitize` as a defense-in-depth measure for both paths; and/or require authorization on actuator endpoints. |
| Steeltoe is an open source project that provides a collection of libraries that helps users build cloud-native applications. In Steeltoe.Configuration.Abstractions 4.0.0 through 4.1.0, when MySQL or PostgreSQL service bindings from `VCAP_SERVICES` include TLS client credentials, the Connectors library writes those credentials to temporary files in `Path.GetTempPath()` using `File.CreateText`. On Linux, `File.CreateText` creates files with mode `0644` (world-readable) under the process umask, and the files are never deleted. The same key material is protected at mode `0400` in `/proc/<pid>/environ`. Steeltoe.Configuration.Abstractions version 4.2.0 patches the issue. If an immediate upgrade is not possible, prevent other processes from running in the container under a different UID with access to `/tmp`. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix conn-level packet handling to unshare RESPONSE packets
The security operations that verify the RESPONSE packets decrypt bits of it
in place - however, the sk_buff may be shared with a packet sniffer, which
would lead to the sniffer seeing an apparently corrupt packet (actually
decrypted).
Fix this by handing a copy of the packet off to the specific security
handler if the packet was cloned. |
| SolidInvoice is an open-source invoicing platform. Prior to version 2.3.17, API tokens used to authenticate all REST API requests are stored as plaintext strings in the api_tokens database table. Any attacker who obtains read access to the database — through SQL injection, a leaked backup, a misconfigured replica, or insider access — immediately obtains all API credentials for every user with no further effort. This issue has been patched in version 2.3.17. |
| A flaw was found in ActiveMQ Artemis management API from version 2.7.0 up until 2.12.0, where a user inadvertently stores passwords in plaintext in the Artemis shadow file (etc/artemis-users.properties file) when executing the `resetUsers` operation. A local attacker can use this flaw to read the contents of the Artemis shadow file. |
