| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been found in vibesurf-ai VibeSurf up to cd6e519d507cdd4d63061300bf60fb176e1f57e0. Impacted is an unknown function of the file /code of the component Python Validation Handler. The manipulation leads to code injection. Remote exploitation of the attack is possible. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: pcrypt - restore callback for non-parallel fallback
pcrypt installs pcrypt_aead_done() on the child AEAD request before
trying to submit it through padata. If padata_do_parallel() returns
-EBUSY, pcrypt falls back to calling the child AEAD directly.
That fallback must not keep the padata completion callback. Otherwise
an asynchronous completion runs pcrypt_aead_done() even though the
request was never enrolled in padata.
Restore the original request callback and callback data before calling
the child AEAD directly. This keeps the fallback path aligned with a
direct AEAD request while leaving the parallel path unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: validate reply message payload bounds against transfer length
nvmet_auth_reply() accesses the variable-length rval[] array using
attacker-controlled hl (hash length) and dhvlen (DH value length) fields
without verifying they fit within the allocated buffer of tl bytes.
A malicious NVMe-oF initiator can craft a DHCHAP_REPLY message with a
small transfer length but large hl/dhvlen values, causing out-of-bounds
heap reads when the target processes the DH public key (rval + 2*hl) or
performs the host response memcmp.
With DH authentication configured, the OOB pointer is passed directly to
sg_init_one() and read by crypto_kpp_compute_shared_secret(), reaching
up to 526 bytes past the buffer. This is exploitable pre-authentication.
Add bounds validation ensuring sizeof(*data) + 2*hl + dhvlen <= tl before
any access to the variable-length fields.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: iowarrior: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked") |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length
check_and_correct_requested_length() compares (off + len) against
node_size using u32 arithmetic. When the caller passes a large len
value (e.g. from an underflowed subtraction in hfs_brec_remove()),
off + len can wrap past 2^32 and produce a small result, causing the
bounds check to pass when it should fail.
For example, with off=14 and len=0xFFFFFFF2 (underflowed from
data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6,
which is less than a typical node_size of 512, so the check passes and
the subsequent memmove reads ~4GB past the node buffer.
Fix this by widening the addition to u64 before comparing against
node_size. This prevents the u32 wrap while keeping the logic
straightforward. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: fix out-of-bounds bit access on mt_io_flags
mt_io_flags is a single unsigned long, but mt_process_slot(),
mt_release_pending_palms() and mt_release_contacts() use it as a
per-slot bitmap indexed by the slot number. That slot number is only
bounded by td->maxcontacts, which is taken from the device's
ContactCountMaximum feature report and can be up to 255, not by
BITS_PER_LONG.
As a result, a multitouch device that advertises a large contact count
makes set_bit()/clear_bit() operate past the mt_io_flags word and
corrupt the adjacent members of struct mt_device. The sticky-fingers
release timer is the easiest way to reach this. mt_release_contacts()
runs
for (i = 0; i < mt->num_slots; i++)
clear_bit(i, &td->mt_io_flags);
with num_slots == maxcontacts. For maxcontacts around 250 the loop
clears the bits that overlap td->applications.next, zeroing that list
head, and the list_for_each_entry() that immediately follows then
dereferences NULL. The kernel panics from timer (softirq) context. On a
KASAN build this shows up as a general protection fault in
mt_release_contacts() with a null-ptr-deref at offset 0x58, which is
offsetof(struct mt_application, num_received).
The state is reachable from an untrusted USB or Bluetooth HID
multitouch device; no local privileges are required.
Store the per-slot active state in a separately allocated bitmap sized
for maxcontacts, the same pattern already used for pending_palm_slots,
and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two
"mt_io_flags & MT_IO_SLOTS_MASK" arming checks become
bitmap_empty(td->active_slots, td->maxcontacts).
Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the
same commit to leave the low byte for the slot bits; with the slot bits
gone it fits in bit 0 again, which also keeps it within the unsigned
long on 32-bit. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (FD links)
proc_pid_get_link() and proc_pid_readlink() currently look up the task from
the pid once, then do the ptrace access check on that task, then look up
the task from the pid a second time to do the actual access.
That's racy in several ways.
To fix it, pass the task to the ->proc_get_link() handler, and instead of
proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that
looks up and locks the task, does the access check, and calls
->proc_get_link(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: harden POSIX SID length parsing
posix_info_sid_size() reads sid[1] to obtain the subauthority count,
but its existing boundary check still accepts buffers with only one
remaining byte. Require two bytes before reading sid[1] so all client
paths that reuse the helper reject truncated POSIX SIDs safely. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix next buffer leak in receive_encrypted_standard()
receive_encrypted_standard() allocates next_buffer before checking
whether the number of compound PDUs already reached MAX_COMPOUND. If
the limit check fails, the function returns immediately and the newly
allocated next_buffer is not assigned to server->smallbuf/server->bigbuf,
making it leaked.
Move the MAX_COMPOUND check before allocating next_buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_flush() replay
SMB2_flush() keeps its response buffer bookkeeping across replay
attempts. If a replayable flush response is received and the retry then
fails before cifs_send_recv() stores a replacement response, flush_exit
will free the stale response pointer a second time.
Reinitialize resp_buftype and rsp_iov at the top of the replay loop so
cleanup only acts on response state produced by the current attempt.
This fixes a double-free without changing replay handling for successful
requests. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix change notify replay double-free
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_notify_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix query directory replay double-free
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_query_directory_init() fails before the next send,
cleanup retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| Information disclosure in Firefox for Android and Firefox Focus for Android. This vulnerability was fixed in Firefox 153.0.3. |
| The fix released in jackson-core 2.18.6 and 2.21.1 for CVE-2026-18401 (GHSA-72hv-8253-57qq, number length constraint bypass in the non-blocking parser) is incomplete. This record covers the remaining bypass.
The earlier fix wired validateIntegerLength() into a new _setIntLength() helper and invoked it wherever the integer portion of a number is decided: a terminator byte arrives, a . or e/E is seen, or input ends inside a fully buffered value. It was not invoked on the attacker-relevant path where the parser runs out of input while still inside the MINOR_NUMBER_INTEGER_DIGITS minor state and returns NOT_AVAILABLE to the caller.
As a result, an attacker who streams JSON to a non-blocking parser in many small chunks, without ever sending a terminator byte, keeps the parser inside MINOR_NUMBER_INTEGER_DIGITS indefinitely. _textBuffer.expandCurrentSegment() grows the accumulator on every chunk while validateIntegerLength() is never called. The accumulator is bounded only by maxStringLength (20 MiB by default) rather than by maxNumberLength (1000 by default), an amplification of roughly 20,000x over the documented limit. Because Java char values occupy two bytes, a single connection can be driven to approximately 40 MiB of heap before the validator finally fires when the value completes.
The equivalent fraction-path code is correct: _finishFloatFraction() calls _setFractLength() before its NOT_AVAILABLE return. The missing call affects the integer-digit paths in _startPositiveNumber(), _startNegativeNumber() and _finishNumberIntegralPart() in NonBlockingUtf8JsonParserBase.
Impact: reactive frameworks such as Spring WebFlux/Reactor, Quarkus, Helidon and Vert.x feed inbound HTTP or gRPC bytes to the async parser as they arrive, which is precisely the chunked-feed shape required. Operators who set StreamReadConstraints.maxNumberLength expecting it to cap memory per number value do not get that guarantee; memory accumulates per concurrent connection and attacker-controlled concurrency can exhaust the JVM heap. The synchronous parsers (UTF8StreamJsonParser, ReaderBasedJsonParser) and the async parser operating on complete input are not affected.
Exploitation requires only the ability to stream data to a parsing endpoint; no privileges or user interaction are needed.
This issue affects com.fasterxml.jackson.core:jackson-core from version 2.15.0 through 2.18.7, from 2.19.0 through 2.21.3, and from 2.22.0 through 2.22.0, and tools.jackson.core:jackson-core from 3.0.0 through 3.1.3 and from 3.2.0 through 3.2.0. Versions prior to 2.15.0 are not affected, because StreamReadConstraints -- which defines the maxNumberLength setting -- was first introduced in jackson-core 2.15.0, so no such constraint exists to be bypassed in earlier releases. Note that GHSA-r7wm-3cxj-wff9 states the affected 2.x range without a lower bound. |
| marimo before 0.23.15 contains a configuration injection vulnerability that allows notebook authors to exfiltrate operator API keys by embedding a malicious base_url in PEP-723 inline script metadata, which is merged into session configuration with higher precedence than the operator's own settings due to insufficient sanitization in sanitize_pyproject_dict. When an operator opens the crafted notebook and makes an AI request, marimo resolves the attacker-controlled base_url from the notebook config while falling back to the operator's OPENAI_API_KEY environment variable for authentication, transmitting the API key to the attacker-controlled endpoint without requiring any cell execution. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.3, Flowise record manager and agent memory nodes allowed users to set arbitrary TypeORM DataSource options through the additionalConfig input in packages/components/nodes/recordmanager/MySQLRecordManager/MySQLrecordManager.ts, packages/components/nodes/recordmanager/PostgresRecordManager/PostgresRecordManager.ts, packages/components/nodes/recordmanager/SQLiteRecordManager/SQLiteRecordManager.ts, packages/components/nodes/memory/AgentMemory/MySQLAgentMemory/MySQLAgentMemory.ts, and packages/components/nodes/memory/AgentMemory/AgentMemory.ts. TypeORM DataSource options such as entities, subscribers, and migrations can load local JavaScript files, allowing an authenticated user to execute arbitrary code on the server by uploading a JavaScript payload and referencing it from additionalConfig.entities. This issue is fixed in version 3.1.3. |
| The Bluetooth host ATT layer (subsys/bluetooth/host/att.c) associates each in-flight ATT TX buffer with its owning channel via the static tx_meta_data_storage[] array (data->att_chan = chan). When a buffer's last reference is dropped, its net-buf destroy callback defers the completion handling to the system workqueue (att_tx_destroy -> att_tx_destroy_work_handler -> att_on_sent_cb -> bt_att_sent), where bt_att_sent dereferences the channel and its ATT context (sys_slist_get(&att->reqs)).
When a peer disconnects while an ATT PDU (a server notification/indication or any response) is still in flight in the controller TX path, L2CAP tears the channel down in l2cap_chan_del(): it runs the disconnected callback and then the released callback (bt_att_released), which frees the channel slab slot. Because the in-flight buffer is held by the connection TX path rather than the channel's own queue, its deferred destroy work can run after the channel has been freed. The att_on_sent_cb guard intended to drop the stale callback itself dereferences meta->att_chan, which is now a dangling pointer into a freed (and possibly reused) slab slot.
A remote peer with an ATT connection can drive this by disconnecting during routine ATT traffic; no pairing or user interaction is required to reach the ATT bearer. The result is a use-after-free read/write of freed channel memory, reliably crashing the Bluetooth host (denial of service) and, because the channel slab slot may be reused, potentially corrupting live memory.
The fix makes bt_att_released() NULL the att_chan field of every tx_meta_data_storage[] entry still referencing the channel before freeing it, so the deferred guard observes a NULL pointer and drops the callback. Teardown and the destroy work both run on the cooperative system workqueue, so the array update is serialized and needs no lock. |
| The non-blocking (asynchronous) JSON parser in jackson-core does not enforce the maxNumberLength constraint defined in StreamReadConstraints (default: 1000 characters). An attacker able to submit JSON to an application that uses the async parser API can supply a number token of arbitrary length, leading to excessive memory allocation and potential CPU exhaustion, resulting in a denial of service.
The synchronous parser enforces this limit correctly, so the constraint is applied inconsistently depending on which parsing API the application uses.
Root cause: the async parsing path in NonBlockingUtf8JsonParserBase and related classes never invokes the number length validation methods. Number parsing methods such as _finishNumberIntegralPart() accumulate digits into the TextBuffer without any length check, then call _valueComplete() to finalize the token. _valueComplete() does not call resetInt() or resetFloat(), which are the methods in ParserBase where validateIntegerLength() and validateFPLength() are performed. Because that validation step is skipped, maxNumberLength is never enforced on the async code path.
Impact: an attacker sending a JSON document containing an arbitrarily long number to an application using the async parser (for example a Spring WebFlux or other reactive application) can cause unbounded allocation in the TextBuffer and an OutOfMemoryError. If the application subsequently calls getBigIntegerValue() or getDecimalValue(), the JVM may additionally be tied up in O(n^2) BigInteger parsing, causing CPU-based denial of service.
No privileges or user interaction beyond the ability to submit data for parsing are required.
This issue affects com.fasterxml.jackson.core:jackson-core from version 2.15.0 through 2.18.5 and from 2.19.0 through 2.21.0, and tools.jackson.core:jackson-core from 3.0.0 through 3.0.x.
Versions prior to 2.15.0 are not affected, because StreamReadConstraints -- which defines the maxNumberLength setting -- was first introduced in jackson-core 2.15.0, so no such constraint exists to be bypassed in earlier releases. Note that GHSA-72hv-8253-57qq records the lower bound of the affected 2.x range as 2.0.0. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.3, the OAuth2 token refresh endpoint POST /api/v1/oauth2-credential/refresh/:credentialId is unauthenticated by design and performs a server-side HTTP request to the credential-controlled accessTokenUrl without SSRF protections. Runtime validation confirmed that the endpoint was reachable without authentication, triggered outbound POST requests to an attacker-controlled server, reflected the full remote response body to the caller through tokenInfo, and sent client_id, client_secret, grant_type=refresh_token, and refresh_token in the request body. This issue is fixed in version 3.1.3. |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: gate must_wait writability check on pte_present()
userfaultfd_must_wait() and userfaultfd_huge_must_wait() read the PTE
without taking the page table lock and then apply pte_write() /
huge_pte_write() to it. Those accessors decode bits from the present
encoding only; on a swap or migration entry they read the offset bits that
happen to share the same position and return an undefined result.
The intent of the check is "is this fault still WP-blocked?". A
non-marker swap entry means the page is in transit -- the userfault
context the original fault delivered against is no longer the same, and
the swap-in or migration completion path will re-deliver a fresh fault if
userspace still needs to handle it. Worst case under the current code the
garbage write bit says "wait", and the thread stays asleep until a
UFFDIO_WAKE that may never arrive.
Gate the writability check on pte_present() so the lockless re-check only
inspects present-PTE bits when the entry is actually present. The
non-present, non-marker case returns "don't wait" and lets the fault path
retry. |
