| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Popup Maker – Boost Sales, Conversions, Optins, Subscribers with the Ultimate WP Popup Builder plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.22.0. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with editor-level access and above, to install and activate an arbitrary plugin from an attacker-controlled URL, leading to remote code execution. Exploitation requires that a valid Popup Maker Pro license is active on the target site and that Popup Maker Pro is not yet installed, as these conditions are necessary for the legacy v1/connect/info endpoint to issue the bearer token used to satisfy the install endpoint's only non-spoofable validation check. |
| The miniOrange OTP Login, Verification and SMS Notifications plugin for WordPress is vulnerable to Authentication Bypass leading to Administrator Account Takeover in all versions up to, and including, 5.5.1. This is due to the `um_reset_password_process_hook()` function performing no server-side verification that the OTP validation step was completed, and relying solely on a public `form_nonce` nonce that the plugin itself emits to unauthenticated visitors via the `moumprvar` JavaScript object on the Ultimate Member password reset page, while still accepting the attacker-controlled `username_b` parameter to target any WordPress user without role restriction or any binding to a previously validated OTP session. This makes it possible for unauthenticated attackers to obtain a freshly generated password-reset URL for an arbitrary Administrator account — returned in a 302 `Location` header — and use it to take full control of that account. Exploitation requires the Ultimate Member Password Reset Form integration to be active and the plugin to not be configured for phone-only reset. |
| The Memberships and User Profiles for WooCommerce – ProfileGrid WooCommerce Integration plugin for WordPress is vulnerable to unauthorized plugin installation and activation in versions up to, and including, 3.4. This is due to a missing capability check and missing nonce validation on the pg_install_profilegrid() AJAX handler registered via wp_ajax_pg_install_profilegrid. This makes it possible for authenticated attackers, with Subscriber-level access and above, to install and activate the ProfileGrid plugin from wordpress. |
| The User Frontend: AI Powered Frontend Posting, User Directory, Profile, Membership & User Registration plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 4.3.7. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to delete arbitrary media attachments whose post_author is 0, such as guest and registration-form uploads, via the wpuf_file_del AJAX action. This is exploitable by unauthenticated visitors on any site where a WPUF shortcode is rendered on a front-end page, as this causes the valid wpuf_nonce value to be localized into publicly accessible JavaScript objects (wpuf_upload and wpuf_frontend), satisfying the sole access control gate. |
| The Backup and Staging by WP Time Capsule plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.22.26 via the download_recent_decrypted_file_wptc. This makes it possible for authenticated attackers, with subscriber-level access and above, to extract download the most recently admin-decrypted SQL database backup, which typically contains password hashes, user credentials, and other sensitive site configuration data stored in the 'recent_decrypted_file' option. Exploitation requires that an administrator has previously performed a decrypt action, causing the decrypted SQL backup file to exist in the plugin's upload directory; without this prior admin action, there is no file to serve. |
| The Age Verification & Identity Verification by Token of Trust plugin for WordPress is vulnerable to unauthorized access in all versions up to and including 4.0.2. This is due to the handle_export_table() function being registered on the WordPress 'init' hook, which fires for all requests, including those from unauthenticated visitors, without any capability check. This makes it possible for unauthenticated attackers to download a CSV file containing sensitive WooCommerce donation data, including order dates, order IDs, charitable donation amounts, and admin-only order edit URLs, simply by visiting any page on the site with the 'tot_export_table' GET parameter set to a numeric value (0–3). |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an incorrect authorization vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to unauthorized command execution. |
| In Blog.Core through bcb4d17, the getinfobytoken API interface contains improper access control that leads to sensitive data exposure. Unauthorized parties can obtain sensitive administrator account information via a valid token, threatening system security. NOTE: Blog.Admin is related front-end code that does not offer an API service. |
| A malicious user with access to deploy a node directly via Ironic can specify the IPMI send_raw deployment step with a malicious payload and send commands to that nodes' BMC. IPMI send_raw capability is exposed multiple ways, including via VendorPassthru interfaces (restricted to system admin) and other step based flows such as cleaning or servicing. This also means any malicious user with the ability to initiate manual cleaning and servicing flows with arbitrary steps can also execute this vulnerability. |
| A malicious actor with access to the network and under certain conditions could exploit an Incorrect Authorization vulnerability found in UniFi Network Application to persist privileges within UniFi Network Application after such access had been removed. |
| Missing authorization in Visual Studio Code allows an unauthorized attacker to elevate privileges over a network. |
| Incorrect Authorization vulnerability in Progress MOVEit Transfer (Audit User module).
This issue affects MOVEit Transfer: before 2025.0.7, from 2025.1.0 before 2025.1.3. |
| OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to 7.260326.0, an authorization bypass vulnerability in OpenCTI allows any authenticated user with KNOWLEDGE_KNUPDATE permission to bypass Confidence Level validation and Object Marking restrictions by injecting the synchronized-upsert: true HTTP header, enabling attackers to downgrade confidence levels, remove security markings such as TLP:RED, manipulate relationships, and affect STIX object types including Indicators, ThreatActors, Malware, and Reports. This issue is fixed in version 7.260326.0. |
| OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to 7.260401.0, the OpenCTI GraphQL API exposes a script filter operator in its FilterOperator enum that allows any authenticated user with the KNOWLEDGE capability to pass user-supplied Elasticsearch Painless script values directly into search queries without validation or sanitization, allowing computationally expensive scripts to consume cluster CPU resources and degrade or deny service for all users. This issue is fixed in version 7.260401.0. |
| Snipe-IT is an IT asset/license management system. Prior to version 8.6.1, the GET /api/v1/{object}/selectlist API endpoint is missing an authorization check. Any user who can log into Snipe-IT - regardless of permissions - can retrieve a paginated list of all user accounts using only their web session cookie. No API token or elevated permissions are required. This exposes usernames, display names, employee numbers, and user IDs for every active account in the system if FMCS is not enabled, and within the company they belong to if FMCS is enabled. Version 8.6.1 contains a patch. |
| HashiCorp Nomad and Nomad Enterprise are vulnerable to a cross-namespace authorization bypass in the dynamic host volumes feature that may allow an operator holding the host volume delete permission in one namespace to delete a sticky volume claim belonging to a job in another namespace. This vulnerability, CVE-2026-14896, is fixed in Nomad Community Edition 2.0.4 and Nomad Enterprise 2.0.4, 1.11.8, and 1.10.14. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.11, 36.0.12, 45.0.3, and 46.0.1, wasmtime-wasi hard-link creation and renaming check directory permissions but not matching FilePerms on source and destination preopens, allowing a WASI guest with a read-only source file capability to overwrite host files exposed as FilePerms::READ through wasip1, wasip2, or wasip3 filesystem interfaces. This issue is fixed in versions 24.0.11, 36.0.12, 45.0.3, and 46.0.1. |
| Snipe-IT is an IT asset/license management system. Prior to version 8.6.1, Snipe-IT S3 signature image retrieval lacks authorization before temporary URL. On S3-backed deployments, authenticated users who know a signature filename can obtain a 5-minute signed S3 URL because the S3 branch returns before the `authorize()` call used by the local-file branch. Version 8.6.1 contains a patch. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 18.2 before 18.11.7, 19.0 before 19.0.4, and 19.1 before 19.1.2 that under certain conditions could have allowed an authenticated user with auditor-level access to modify compliance violation records due to improper authorization on certain GraphQL operations. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 9.1 before 18.11.7, 19.0 before 19.0.4, and 19.1 before 19.1.2 that under certain conditions could have allowed an unauthenticated user to determine the existence of a private project due to improper authorization controls on cross-project reference pages. |
