Export limit exceeded: 395528 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395528 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90332 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Flush cached MSI write before unmapping the iATU The MSI-X path already flushes any posted MSI-X write before tearing down its iATU mapping. That was added by commit c22533c66cca ("PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry") to make sure the write reaches the Root Complex before the outbound window that translates it disappears. The MSI path has the same problem but no equivalent flush. When the Endpoint driver caches an MSI target address and later observes that the Root Complex has changed it, dw_pcie_ep_raise_msi_irq() unmaps the existing iATU entry and reprograms it for the new address. Between the last MSI writel() and the unmap there may still be a posted write sitting in the fabric, and unmapping the iATU entry can drop or misroute that write. Fix this by reading back from the mapped MSI window before the unmap. The readback drains any posted MSI writes through the same iATU entry that mapped them, which is the same logic the MSI-X path uses. [mani: commit log] | ||||
| CVE-2026-90347 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: Keep 'orig_x0' in-sync with x0 on syscall entry Commit e057b9477232 ("arm64: syscall: Ensure saved x0 is kept in-sync with tracer updates") attempted to resolve a long-standing issue with syscall entry tracing, where a tracer is able to manipulate the first syscall argument without being subjected to seccomp or audit checking. Unfortunately, that fix was incomplete [1], as it failed to update 'orig_x0' between a tracer updating x0 during a seccomp ptrace exit (SECCOMP_RET_TRACE) and the seccomp filter being re-evaluated. Rather than add hooks to the core seccomp code, instead move the synchronisation code into the ptrace GPR and syscall setting code so that 'orig_x0' is kept up to date with x0 whenever we're stopped on the syscall entry path. | ||||
| CVE-2026-90380 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt792x: fix use-after-free in mt76_rx_poll_complete A use-after-free issue occurs in mt76_rx_poll_complete due to a race condition. The STA has already been removed, but the rx_status still had a pointer to the wcid in the STA. Set the links' wcid pointers to be NULL for a MLD in mt7925_sta_pre_rcu_remove() BUG: KASAN: invalid-access in mt76_rx_poll_complete+0x280/0x470 Call trace: dump_backtrace+0xec/0x128 show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc8 print_report+0x1b8/0x710 kasan_report+0xe0/0x144 do_bad_area+0x120/0x260 do_tag_check_fault+0x20/0x34 do_mem_abort+0x54/0xa8 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x40/0xcc el1h_64_sync+0x7c/0x80 mt76_rx_poll_complete+0x280/0x470 mt76_dma_rx_poll+0x114/0x51c mt792x_poll_rx+0x60/0xf8 napi_threaded_poll_loop+0xe0/0x450 napi_threaded_poll+0x80/0x9c kthread+0x11c/0x158 ret_from_fork+0x10/0x20 | ||||
| CVE-2026-90387 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: swiotlb: Preserve allocation virtual address for dynamic pools swiotlb_alloc_tlb() can allocate from the DMA atomic pool when a decrypted pool is needed from atomic context. With CONFIG_DMA_DIRECT_REMAP, the atomic pool is backed by remapped virtual addresses, which are not the same as the direct-map addresses returned by phys_to_virt(). swiotlb_init_io_tlb_pool() currently reconstructs the pool virtual address from the physical start address. For atomic-pool backed allocations this stores the wrong address in pool->vaddr. Later, swiotlb_free_tlb() passes that address to dma_free_from_pool(), which will fail to recognize the chunk Pass the virtual address returned by the allocation path into swiotlb_init_io_tlb_pool(), and store that address in pool->vaddr. This keeps the pool free path using the same virtual address as the allocator. | ||||
| CVE-2026-90388 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/dma: Check atomic pool allocation result directly The non-blocking, non-coherent allocation path uses dma_alloc_from_pool(), which returns the allocated page and fills cpu_addr only on success. Do not rely on cpu_addr to detect allocation failure in this path. Check the returned page directly before using it for the IOMMU mapping. | ||||
| CVE-2026-90425 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Require exactly one Stream ID for a vSID tegra241_vintf_init_vsid() maps a guest vSID to a single physical Stream ID taken from master->streams[0], and only warns when the device does not have exactly one stream. A device with several streams gets only its first one mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out of bounds. Reject the mapping with -EOPNOTSUPP if master->num_streams is not one. | ||||
| CVE-2026-90427 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc() __tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger tegra241_cmdqv, which frees the original @smmu once it relocates. A failure after that returned NULL, and the caller then dereferenced the freed @smmu on its fallback path. Return an int and take @smmu by reference instead, then update *smmu to the reallocated pointer after devm_krealloc() succeeds, so the caller and its fallback path both use the live @smmu rather than the freed original. | ||||
| CVE-2026-90429 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Synchronize the error ISR against VINTF (de)init A user VINTF is torn down by tegra241_cmdqv_deinit_vintf(), which runs from the destroy callback and from the init-failure unwind in the alloc handler. It clears the cmdqv->vintfs[] slot and lets the iommufd core free it, but nothing serializes that against the error interrupt: tegra241_cmdqv_isr() reads cmdqv->vintfs[idx] and dereferences the vintf. A concurrent error can make the ISR read a slot mid-clear (a NULL deref) or use a vintf which is about to be freed (a use-after-free). deinit_vintf() also returns idx to the IDA before clearing the slot, so a concurrent create that reuses idx can publish its new vintf into the slot, only for this teardown to erase it again with the stale NULL store. On the other end, tegra241_cmdqv_init_vintf() publishes a new vintf with a plain store to the cmdqv->vintfs[] slot, and the ISR dereferences fields of a published vintf such as vintf->base. A plain store gives no ordering on a weakly-ordered CPU, and a stale VINTF_ERR_MAP bit on a reused idx can make the ISR pick a vintf the moment it is published, before its fields are set or tegra241_vintf_hw_init() runs. The cmdqv->vintfs[0] slot stays NULL until tegra241_cmdqv_init_structures() first creates VINTF0, so the slot 0 read needs the same NULL check. Publish every slot with an smp_store_release(), and read each slot in the ISR with an smp_load_acquire() under a NULL check, so the ISR always sees a fully built vintf or NULL. Also make deinit_vintf() clear the slot, and synchronize_irq() prior to returning idx to the IDA, so no vintf is freed under a running handler and no reused idx is clobbered. | ||||
| CVE-2026-90435 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix integer overflow of user QP buffer size set_user_buf_size() computes the QP buffer size by left-shifting the user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers. A sufficiently large rq.wqe_cnt causes signed integer overflow, which is undefined behavior, and yields a small or negative buf_size, causing ib_umem_get() to map a buffer smaller than the hardware will actually write into. Replace the shifts and addition with check_shl_overflow() and check_add_overflow(), rejecting invalid user inputs. Moreover, guard the identical shift computing qp->sq.offset in _create_user_qp() before set_user_buf_size() is reached. | ||||
| CVE-2026-92504 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: intel: int3400: clean up ODVP on probe failures evaluate_odvp() creates per-ODVP sysfs files before the thermal zone and later probe resources are registered. The current unwind path only calls cleanup_odvp() from the late sysfs failure path, so failures after evaluate_odvp() but before that label, including thermal_tripless_zone_device_register() failures, leave the ODVP files and storage behind. Move the ODVP cleanup to the common ART/TRT unwind path so every failure after evaluate_odvp() releases the ODVP state. Also clear the cached ODVP pointers in cleanup_odvp(), because evaluate_odvp() can already call it for partial setup failures while probe continues. | ||||
| CVE-2026-92511 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_cq_user() When accessing a CQ via the netlink path the only synchronization mechanism for the said CQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_destroy_cq_user(), which is too late, since by that point vendor-specific resources associated with the CQ might already be freed. This can leave a short window where the CQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_destroy_cq_user(), ensuring that the CQ is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a CQ that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable. | ||||
| CVE-2026-94054 | 1 Exim | 1 Exim | 2026-09-20 | 7 High |
| Exim before 4.100.1, when Proxy-Protocol is used with an attacker-controlled proxy, has an out-of-bounds write. | ||||
| CVE-2026-94055 | 1 Exim | 1 Exim | 2026-09-20 | 3.7 Low |
| Exim before 4.100.1, when certain non-default TLS settings are used with GnuTLS, has a use-after-free. | ||||
| CVE-2026-94056 | 1 Exim | 1 Exim | 2026-09-20 | 7.5 High |
| Exim before 4.100.1, when Proxy-Protocol is used with an attacker-controlled proxy, allows attackers to read certain uninitialized data from stack memory. | ||||
| CVE-2026-94057 | 1 Exim | 1 Exim | 2026-09-20 | 4 Medium |
| Exim before 4.100.1 allows SMTP smuggling in which the received message does not match any sent message, and instead depends on crafted data sent after a rejection during DATA processing. | ||||
| CVE-2026-93095 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: validate thread record before delete key rebuild hfsplus_delete_cat() is called with str == NULL when the last open reference to an unlinked HFS+ hardlink backing inode is closed. In that case, the function finds the catalog thread by CNID and rebuilds the catalog key from thread.nodeName. That reconstruction path reads thread.nodeName.length directly from the catalog B-tree into fd.search_key and then copies length * 2 bytes into fd.search_key->cat.name.unicode. It does not first check that the found record is a thread record or that its size matches the thread name. A corrupted image can therefore provide an oversized thread name length and make hfs_bnode_read() write past the catalog search-key allocation. Read the CNID record through hfsplus_brec_read_cat(), which bounds the record read to sizeof(hfsplus_cat_entry) and verifies that a thread record's size exactly matches nodeName.length. Together, these checks ensure an accepted thread name fits HFSPLUS_MAX_STRLEN. Reject non-thread records before building the delete key from the validated thread name. Share the thread-record-type helper between hfsplus_find_cat() and hfsplus_delete_cat(). | ||||
| CVE-2026-93121 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix fence cleanup in ffs_dmabuf_transfer() error paths The error paths for endpoint-disabled (ESHUTDOWN) and request-allocation failure (ENOMEM) in ffs_dmabuf_transfer() jump to err_fence_put which calls dma_fence_put() on the fence. However, at that point the fence has only been kmalloc'd — dma_fence_init() has not been called yet, so the refcount and the fence ops are uninitialized. Calling dma_fence_put() on such an object leads to undefined behavior. Use kfree() instead, since the fence is just a plain allocation at this stage, and rename the label to err_fence_free to reflect the actual cleanup action. | ||||
| CVE-2026-93144 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject writes through untrusted BTF pointers check_ptr_to_btf_access() lets program-type btf_struct_access callbacks validate writes before the default BTF access path rejects non-read accesses. That bypasses the read-only policy for untrusted BTF pointers created by helpers such as bpf_rdonly_cast(). Reject non-read accesses through PTR_UNTRUSTED BTF pointers at the common entry point, before the callback branch to handle all cases. | ||||
| CVE-2026-93178 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm/powerplay: bounds-check voltage index in SMU7 lookup vddInd and vddcInd fields from VBIOS-parsed tables are used to index into voltage lookup tables without a bounds check. Return -EINVAL when any index is out of range. | ||||
| CVE-2026-93189 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: quiesce input in hid_hw_stop() to prevent use-after-free A driver's probe calls hid_device_io_start() to enable input delivery, then fails at a later initialization step and unwinds via hid_hw_stop(). The unwind frees struct hidraw via hidraw_disconnect() while in-flight HID reports may still be running on another CPU, dereferencing the freed object through hidraw_report_event(). syzbot reports the resulting use-after-free for the corsair-psu HID driver. Edward Adam Davis posted a per-driver fix for corsair-psu that adds an explicit hid_device_io_stop() before hid_hw_stop() in the probe error path ("hwmon: prevent packets from going to driver for probe", 2026-04-28). Auditing the tree shows 15 drivers call hid_device_io_start(); 7 also call hid_device_io_stop() and 8 do not: drivers calling hid_device_io_start() without a matching hid_device_io_stop() before hid_hw_stop(): drivers/hwmon/corsair-psu.c (fix posted by Edward) drivers/hwmon/corsair-cpro.c drivers/hwmon/nzxt-kraken3.c drivers/hwmon/nzxt-smart2.c drivers/hwmon/gigabyte_waterforce.c drivers/hid/hid-logitech-dj.c drivers/hid/hid-nintendo.c drivers/hid/hid-mcp2221.c Roughly half of all callers of the API are exposed. Centralize the quiesce in hid_hw_stop() so callers do not have to remember the matching stop: if a driver has left hdev->io_started true on entry, call hid_device_io_stop() before hid_disconnect(). For the 7 drivers that already call hid_device_io_stop() correctly, hdev->io_started is false on entry, the guard short-circuits, and behavior is unchanged. No Fixes: tag because the affected drivers gained their hid_device_io_start() calls independently over years; the bug is a class-wide API misuse rather than a regression from one commit. | ||||